manualshive.com logo in svg

E-Mu Ultraproteus, Руководство по эксплуатации, Страница: 218 / 307

Поделиться
Скачать
E-Mu Ultraproteus Скачать руководство пользователя страница 218

197

Chapter 11: Reference Section

Z-PLANE FILTER DESCRIPTIONS

F105

AcGtrRs.4

This filter is designed to emulate some of the resonant characteristics of an
acoustic guitar body. With Morph Offset and Frequency Tracking set to
000, the body is extremely resonant, as if a large acoustic guitar were close-
miked near the sound hole. Vary the value for Morph Offset to vary the ‘mic
position’. Route velocity to Freq. Tracking for controlling brightness and
‘pick position’.

Morph: 

Controls filter formant notch depth and position.

Freq. Tracking: 

Frequency Tracking.

Transform 2: 

Not used.

F106

Tube Sust.4

Use this filter with broad-band waves to produce sounds characteristic of
distorted guitars. The fullest sounds are achieved with Morph Offset set to
255, and Frequency Tracking set to 000

Morph: 

Increasing this increases bass and midrange.

Freq. Tracking: 

Controls the lower-midrange.

Transform 2: 

Not used.

F107

GtrSkwk
Morph: 

Plays the squeak.

Freq. Tracking: 

Provides key tracking to balance keyboard brightness.

Transform 2: 

Makes brighter, adds more volume and squeak.

Comments: 

Higher Transform 2 allows morphing to “string squeak”.

Best used with Aux. Env or FG to control this. Routing Velocity to
Transform 2 will reduce squeak on low velocities.

F108

GuitXpress

Increasing the Morph Offset value places a notch in the frequency spec-
trum, the tuning of which can be controlled via the Frequency Tracking
and Transform 2 parameters. In addition, increasing the value for Fre-
quency Tracking and/or Transform 2 raises the cutoff point of the lowpass
filter. This filter can be used to add a measure of expressiveness, particu-
larly to acoustic instrument simulations. Try using velocity to control
Transform 2 and key position to Frequency Tracking. For an additional
measure of control, assign Control A (the mod wheel) to control Morph in
the Note-on Control section.

Morph: 

Increases the depth of the filter notch.

Freq. Tracking: 

Tunes the notch and controls filter cutoff point.

Transform 2: 

Tunes the notch and controls filter cutoff point.

Содержание Ultraproteus




















































































































































































































































































































Отзывы:

Нет отзывов