manualshive.com logo in svg

E-Mu Ultraproteus, Руководство по эксплуатации, Страница: 222 / 307

Поделиться
Скачать
E-Mu Ultraproteus Скачать руководство пользователя страница 222

201

Chapter 11: Reference Section

Z-PLANE FILTER DESCRIPTIONS

F127

0>Shp1
Morph: 

Changes from flat to shape.

Freq. Tracking: 

Provides key tracking to maintain spectrum.

Transform 2: 

Controls brightness and volume.

Comments: 

Imposes a vowel like shape on a pure sound. (Can be useful

for morphing in and out using two samples.)

F128

0>Shp2
Morph: 

Changes from flat to shape.

Freq. Tracking: 

Provides key tracking to maintain spectrum.

Transform 2: 

Controls brightness and volume.

Comments: 

More vowel like changes than 0>Shape1.

F129

0>Shp3
Morph: 

Sweeps to shape.

Freq. Tracking: 

Provides key tracking to balance keyboard brightness.

Transform 2: 

Controls brightness and volume.

Comments: 

Morphing imposes a shape on the sound. Low velocity for

mellow, high for bright.

F130

Shp>Shp1

Starts with peaks every half octave from 66Hz and morphs to peaks every
octave beginning at 66Hz Effect is ‘ee’ to ‘u’ with Frequency Tracking fully
offset. Transform 2 reveals a completely flat response with all axes offset.

F131

Lpeq Vel
Morph: 

Moves between different “softs” & “brights”.

Freq. Tracking: 

Provides key tracking to maintain spectrum.

Transform 2: 

Controls brightness and volume.

Comments: 

Position of the Morph determines the nature of the soft-

ness and brightness.

F132

CleanSweep4

A number of lowpass, highpass and bandpass type effects can be produced
using this filter. It works particularly well on solo brass waves to produce a
variety of mute effects.

Morph: 

Effects range from lowpass with low ‘Q’ to highpass with high

‘Q’.

Freq. Tracking: 

Increase for thinner, brighter and more resonant

sounds.

Transform 2: 

Not used.

Содержание Ultraproteus




















































































































































































































































































































Отзывы:

Нет отзывов