E-Mu Ultraproteus Скачать руководство пользователя страница 250

Страница: 250 / 307

229

Chapter 11: Reference Section

F262

Trempeto.4
Morph:

At 0 offset, response is a lowpass with bump at

≈

50Hz and cut-

off before 1000Hz. At 255, filter is flat.

Freq. Tracking:

Tracks keyboard.

Transform 2:

Not Used.

F263

SfBrzando.4
Morph:

Starts with a 12dB overall boost except for a dip at

≈

140Hz. At

higher values, dip is reduced and boost increased after dip until
flattening at 5kHz.

Freq. Tracking:
Transform 2:

Not Used.

F264

UduFilter.4

Designed to enhance the velocity response of percussion sounds, especially
the Udu.

Morph:

Contains a single peak at 240Hz with mild roll-off of higher

frequencies at low Morph offsets, becoming flatter with higher Morph
offsets.

Freq. Tracking:

Tracks five octaves.

Transform 2:

Not Used.

F265

Hip Kick
Morph:

Adjusts slope of low-pass response.

Freq. Tracking:

Tunes filters.

Transform 2:

Reduces overall lowpass effect.

F266

Cymbal Cube

Useful for simulating the response of a cymbal to changes in drumstick
location.

Morph:

Positions drumstick on cymbal.

Freq. Tracking:

Tunes the filter.

Transform 2:

Larger values reduce filter effect.

F267

ChimeFlange
Morph and Freq. Tracking:

Provide two different sets of peaks and

notches (Filt. Freq. Track uses higher frequencies overall) which both
raise in frequency as values are increased. Cool with Gamelan and
various bells.

Transform 2:

Reduces filter effect.

Z-PLANE FILTER DESCRIPTIONS

Содержание Ultraproteus




















































































































































































































































































































Результаты поиска

Содержание Ultraproteus

Отзывы:

E-Mu Ultraproteus, Руководство по эксплуатации, Страница: 250 / 307

Результаты поиска

Содержание Ultraproteus

Отзывы: