manualshive.com logo in svg

E-Mu MP-7 command station, Руководство пользователя, Страница: 85 / 388

Поделиться
Скачать
E-Mu MP-7 command station Скачать руководство пользователя страница 85

MP-7 Owners Manual   

73

Sequencer

Pattern Edit Menu

  

To Set the Pattern Length from the Main Pattern Screen:

1.

Select the pattern

 in Pattern mode.

2.

Move the cursor to the 

Length

 (Ln) field using the cursor keys.

3.

Set the 

Length

 of the pattern using the data entry control.

Setting Meter 
(Time Signature)

MP-7 allows you to set almost any conceivable time signature. The 
numerator (indicating number of beats in a measure) can be set from 1 to 
99. The denominator (indicating the rhythmic value of each beat) can be 
set to 1, 2, 4, 8, 16, 32, or 64. The time signature can be changed at any 
time before or after recording.

The meter setting affects the bar:beat display, the pattern length, 
metronome accent, and the grid recording display.

For background information about Time Signatures, see page 338. 

  

To Set the Time Signature

1.

Select the pattern

 in which you want to record.

2.

Press the 

Pattern Edit

 button. The Pattern Edit menu screen displays 

the menu page most recently selected since powering up MP-7.

3.

Scroll to the 

Meter

 screen using the data entry control. The meter 

setting will probably show the 04/4 default time signature.

4.

Press the right cursor button once to move the cursor underneath the 
numerator field.

5.

Set the 

time signature numerator

 value using the data entry control.

6.

Press the right cursor button again to move the cursor underneath the 
denominator field.

7.

Set the 

time signature denominator

 value using the data entry 

control.

8.

Press the 

Pattern Edit

 button again to exit pattern edit mode.

T

01  STOP   Ln: 02   Bar: 01 . 1

000

0

  Start of IT   

METER      METRONOME      VALUE

04 / 4       off                    1/8         

Содержание MP-7 command station





































































































































































































































































































































































































Отзывы:

Нет отзывов