manualshive.com logo in svg

E-Mu MP-7 command station, Руководство пользователя, Страница: 124 / 388

Поделиться
Скачать
E-Mu MP-7 command station Скачать руководство пользователя страница 124

112 

  E-MU Systems

Sequencer

Song Edit Menu

  

To Set the Event Sources for a Song

1.

Select the Song

 you wish to edit in Song mode.

2.

Press the 

Song Edit

 button.

3.

Scroll to the 

Event Source

 screen shown below using the data entry 

control.

4.

Select: 

Song Events Only

, 

First Pattern Only

, 

All Patterns, or Song & 

Patterns

 for each event type.

5.

Press the 

Song Edit

 button again to exit the module.

Setting Meter 
(Time Signature)

MP-7 allows you to set almost any conceivable time signature. The 
numerator (indicating number of beats in a measure) can be set from 1 to 
99. The denominator (indicating the rhythmic value of each beat) can be 
set to 1, 2, 4, 8, 16, 32, or 64. The time signature can be changed at any 
time before or after recording.

The meter setting affects the bar:beat display, the pattern length, 
metronome accent, and the grid recording display.

For more information about Time Signatures, see page 338. 

  

To Set the Time Signature

1.

Select the song

 in which you want to record in Song mode.

2.

Press the 

Song Edit

 button. The Song Edit menu screen displays the 

menu page most recently selected since powering up MP-7.

3.

Scroll to the 

Meter

 screen using the data entry control. The meter 

setting will probably show the 04/4 default time signature.

4.

Press the right cursor button once to move the cursor underneath the 
numerator field.

5.

Set the 

time signature numerator

 value using the data entry control.

6.

Press the right cursor button again to move the cursor underneath the 
denominator field.

7.

Set the 

time signature denominator

 value using the data entry 

control.

8.

Press the 

Song Edit

 button again to exit Song Edit mode.

EVENT SOURCE 

tempo:      song events only

METER      METRONOME      VALUE

04 / 4       off                    1/8         

Содержание MP-7 command station





































































































































































































































































































































































































Отзывы:

Нет отзывов