manualshive.com logo in svg

E-Mu MP-7 command station, Руководство пользователя, Страница: 128 / 388

Поделиться
Скачать
E-Mu MP-7 command station Скачать руководство пользователя страница 128

116 

  E-MU Systems

Sequencer

Song Edit Menu

Transpose

All notes in a song can be transposed up or down from -127 to +127 
semitones. For example with a setting of +7, all notes in the song would be 
transposed up a perfect fifth.

Note:

 This filter transposes note data recorded in Realtime Song mode. It 

does NOT affect notes recorded into Patterns.

  

To Transpose Notes in a Song

1.

Select the song

 you wish to edit.

2.

Press the 

Song Edit

 button.

3.

Scroll to the Transpose screen using the data entry control.

4.

Select the 

amount of transposition

 you want. The Home/Enter LED 

will be flashing once the cursor is moved to the lower line of the 
display.

5.

Press 

Enter

. Move the cursor to the lower line to select a key range to be 

transposed. The default setting is all keys.

6.

Press 

Enter

 to transpose the pattern. Press any other button to 

Cancel

 

the operation.

TRANSPOSE

+7  semitones

SELECT KEY RANGE

Key Range: C-2   to:G8

Low Key

High Key

Содержание MP-7 command station





































































































































































































































































































































































































Отзывы:

Нет отзывов