manualshive.com logo in svg

E-Mu MP-7 command station, Руководство пользователя, Страница: 39 / 388

Поделиться
Скачать
E-Mu MP-7 command station Скачать руководство пользователя страница 39

MP-7 Owners Manual   

27

Instant Gratification

Exploring the Master Arpeggiator

Exploring the Master 
Arpeggiator

MP-7’s multi-channel Pattern Generator/Arpeggiator is one of the greatest 
features ever put in a synth. Let’s explore the Master Arpeggiator.

  

To Arpeggiate a Single Preset:

1.

Select a preset

. Note that the factory presets all have prefixes which 

describe the type of sound. For this investigation it might be best to 
choose a preset with the prefix “arp,” for arpeggiator. These presets are 
optimized for use with the arpeggiator.

2.

Set the Arp parameter in the main preset selection screen to “

M

” for 

Master Arpeggiator.

3.

Press the 

Arp 

button in the Edit section of the front panel to access the 

master Arpeggiator menu, then use the 

data entry control

 to scroll to 

the screen shown below.

4.

Make sure the arpeggiator Status is “

on

.” Play the keyboard to start 

arpeggiating.

O

O

O

O

Try using control knobs 

15 & 16 to change the 
arpeggiator parameters.

5.

Press either 

cursor key

 repeatedly to move the cursor below the Status 

field. 

6.

Turn the 

data entry control

 clockwise one click. The Mode screen 

appears.

7.

Use the 

cursor keys

 to move the cursor to the 

Mode

 field (up, down, up/

down, forw asgn, backw asgn, forw/backw, random, pattern). Try out 
the different modes as you play the keyboard.

8.

Move the cursor back to the lower left position and explore the other 
parameters. The 

Note Value

 parameter changes the rate of the arpeggios. 

By the way, note value is a divisor based on the Master Tempo. Try 
changing the tempo, but come right back.

 C01    V127    P01

R

     A:M       MP-7

 123

3

    arp: OrbisTabula1

 MASTER  ARPEGGIATOR

Status                              on

 MASTER  ARPEGGIATOR

 Mode                     up

Содержание MP-7 command station





































































































































































































































































































































































































Отзывы:

Нет отзывов