manualshive.com logo in svg

E-Mu MP-7 command station, Руководство пользователя, Страница: 27 / 388

Поделиться
Скачать
E-Mu MP-7 command station Скачать руководство пользователя страница 27

MP-7 Owners Manual  

 15

Setup

This section thoroughly describes how to set up your new MP-7 for use. 
Setup includes unpacking instructions, how to hook up the unit to your 
sound system and, most importantly, how to turn the thing on and off. 

Unpacking

Carefully remove MP-7 from the packaging material. Take care to save the 
packing materials in case you need to transport the unit. Check to make 
sure all components are included and in good condition. If there are 
missing or damaged components, contact E-MU Systems immediately for 
replacement or repair.

The MP-7 box should include the following components:

•

MP-7 unit

•

Power cable

•

This operation manual

•

Command Station CD-ROM

The following optional accessories are not included with your MP-7, but are 
available from your E-MU dealer for a nominal fee:

•

Model 7770 - Rack Mounting Ears

•

Model 7772 - MP-7 Gig Bag

•

Model 7773 - Locking 12VDC Lamp

Содержание MP-7 command station





































































































































































































































































































































































































Отзывы:

Нет отзывов