manualshive.com logo in svg

E-Mu MP-7 command station, Руководство пользователя, Страница: 159 / 388

Поделиться
Скачать
E-Mu MP-7 command station Скачать руководство пользователя страница 159

MP-7 Owners Manual   

147

Global Menu

Multisetups

2.

Press either 

cursor

 button to move the cursor to the bottom line of the 

screen.

3.

Now, use the 

data entry control

 to select a Multisetup. The Enter LED 

will be flashing.

4.

Press the 

Enter

 button to load the selected Multisetup.

Multisetup Name

Multisetups can be named to make it easier to remember their purpose.

1.

Scroll to the “Setup Name” screen (shown below) using the 

data entry 

control

.

2.

Press either 

cursor

 button to move the cursor to the bottom line of the 

screen.

3.

Change the characters using the 

data entry control

. Change the cursor 

position using the cursor buttons.

4.

Press 

Enter

 or move the cursor to the top line when you’re finished 

naming the multisetup.

Saving Multisetups

  

To Save a Multisetup:

1.

Set the Preset, Volume, Pan and Arp settings (in Preset View mode) for 
all channels. Set the Global, MIDI, and Controllers menu parameters 
the way you want them.

2.

Press the 

Global

 button, then scroll to the “Save Setup” screen (shown 

below) using the 

data entry control

.

3.

Press either 

cursor

 button to move the cursor to the bottom line of the 

screen.

4.

Now, use the 

data entry control

 to select the destination location. The 

Enter LED will be flashing.

5.

Press the 

Enter

 button to save the Multisetup.

MULTISETUP NAME

020

 

User Setup 23 

SAVE  SETUP  TO

020

 

 Destination Multisetup 

Содержание MP-7 command station





































































































































































































































































































































































































Отзывы:

Нет отзывов