manualshive.com logo in svg

E-Mu MP-7 command station, Руководство пользователя, Страница: 236 / 388

Поделиться
Скачать
E-Mu MP-7 command station Скачать руководство пользователя страница 236

224 

  E-MU Systems

Preset Edit Menu

Low Frequency Oscillators (LFOs)

Low Frequency 
Oscillators (LFOs)

A Low Frequency Oscillator or LFO, is simply a wave that repeats at a slow 
speed. MP-7 has two LFOs per layer identified on the display as LFO1 and 
LFO2.

An LFO can be routed to any real-time control destination using a 
PatchCord. LFOs have a myriad of uses, some of which probably haven’t 
been thought of yet. The following examples show a few common uses.

•

Control the pitch of the sound (LFO -> Pitch). This effect is called 

“vibrato” and is an important performance tool. Many presets use this 
routing with the modulation wheel controlling “how much” modula-
tion is applied.

•

Create a “tremolo” effect by routing the LFO to control the volume 

(LFO -> AmpVolume). 

•

Add a bit of animation to the sound by routing the LFO to control the 

filter. Set the PatchCord amount low for a subtle effect.

The LFOs have five parameters: Shape, Sync, Rate, Delay and Variation.

Shape

 LFO waveforms have different shapes. The shape of the waveform deter-
mines the effect of the LFO. LFOs have traditionally been used to add 
vibrato or repeating movement to a sound. These new shapes offer a lot of 
new programming possibilities.

If you modulate the pitch of an instrument, it’s easy to visualize the shape 
of the waveform. For example, the sine wave has a smooth, rolling shape 
that changes the pitch smoothly. The square waveform changes between 
two pitches abruptly. A sawtooth waveform increases the pitch smoothly, 
then abruptly changes back down. The available waveforms are shown on 
the following page.

L1

  LFO1             SHAPE             SYNC

                    sawtooth        key sync

Содержание MP-7 command station





































































































































































































































































































































































































Отзывы:

Нет отзывов