manualshive.com logo in svg

E-Mu MP-7 command station, Руководство пользователя, Страница: 64 / 388

Поделиться
Скачать
E-Mu MP-7 command station Скачать руководство пользователя страница 64

52 

  E-MU Systems

Sequencer

Definitions

Pattern Recording & Editing

Patterns can be edited in three ways:

•

Realtime Record

 - Events are stored in the designated track as they are 

played on the keypad or from the MIDI input port. Events are over-
dubbed into the track as the track plays and loops. The original channel 
of each event is maintained when recorded.

Individual events can be erased by pressing the realtime erase button 
and re-playing the event during the time that the event occurs in the 
pattern.

•

Grid Editing

 - In this mode, the sixteen trigger buttons become a time 

grid. A note event is first selected and is then placed at any time location 
by pressing the appropriate grid button.

The grid resolution can be changed to allow a whole measure or a frac-
tion of a measure to be displayed on the button grid.

•

Step Edit

 - In this mode, you can single-step through the time locations 

(bars, beats, & ticks) and place events anywhere you want.

The play button jumps from the current location to the next note value 
as determined by the resolution setting.

The Asterisk

When a pattern (or song) has been edited and needs to be saved an asterisk 
(*) appears in the display. The Save/Copy LED will also be flashing as a 
reminder to save your work. The asterisk and your edits remain in the 
single edit buffer even if you change patterns. Edits are only erased by 
saving the pattern, editing another pattern, invoking the “Revert To Saved” 
feature, or turning the unit off. Saving saves the current pattern and NOT 
the edit buffer.

Standard MIDI Files

Patterns can also be imported from a Standard MIDI File (SMF) dump. SMF 
type 0 files are imported with MIDI channels 1-16 going to the same 
numbered MP-7 track. SMF type 1 files are imported with tracks 1-16 going 
to the same numbered MP-7 track. Tracks 17 and above will not be 
imported into MP-7.

Press Once

Press Twice

Press 3 Times

Asterisk 
Appears

Pressing Rec

List Edit
(press enter)

Executing 
an Edit 
function

No 
Asterisk

Changing: 
tempo, 
meter, 
length, 
name, chan. 
assign, etc.

O

O

O

O

Use the “Revert to 

Saved Pattern” feature to 
remove the asterisk and discard 
your pattern edits. See 
page 103 for more 
information.

T

01  STOP   Ln: 08   Bar: 01 . 1

000

0

  Start of IT   

*

Indicates that the Pattern 
needs to be saved.

Содержание MP-7 command station





































































































































































































































































































































































































Отзывы:

Нет отзывов