manualshive.com logo in svg

E-Mu MP-7 command station, Руководство пользователя, Страница: 131 / 388

Поделиться
Скачать
E-Mu MP-7 command station Скачать руководство пользователя страница 131

MP-7 Owners Manual   

119

Sequencer

Song Edit Menu

Copy Track to 
Clipboard

A section of a track can be copied and held on a digital “clipboard” so that 
it can be pasted into another location on the song track. This function 
makes a digital copy of the track and places it on the clipboard, where it 
will be held until it is replaced with another cut or copy operation, or the 
power to MP-7 is turned off. The copied 

Paste

 functions.

Pattern Play events are NOT affected by the copy operation.

 Pattern play 

events must be edited using Step Record.

  

To Copy a Track

1.

Select the pattern

 you wish to edit.

2.

Press the 

Pattern Edit

 button.

3.

Scroll to the 

Copy Track to Clipboard

 screen shown below using the 

data entry control.

The Track Number 

cannot be changed in a Song 
since there is only one track.

4.

Select the 

Start Bar

 and the 

Length 

(in bars) to be copied. The Home/

Enter LED will be flashing once the cursor is moved to the lower line of 
the display.

5.

Press 

Enter

 to copy the track. Press any other menu button to 

Cancel

 

the operation.

Song Track

The copied section is placed on the clipboard leaving the song 

track intact and untouched.

COPY TRACK TO CLIPBOARD

Track: 1     Bar:06   Len:07

Содержание MP-7 command station





































































































































































































































































































































































































Отзывы:

Нет отзывов