E-Mu MP-7 command station Скачать руководство пользователя страница 114

Страница: 114 / 388

102

E-MU Systems

Sequencer

Pattern Edit Menu

Move the cursor under the

bpm field

and set the tempo.

Set the

Time Location

where you want the tempo change to occur.



To Insert a new Event

1) Press the Repeat button.
2) Modify the Time & Tempo.

If you want to add another tempo change, press the

Repeat

button on

the MP-7 front panel.

Change the

Time Location

and

Tempo.

10.

Press the

Pattern Edit

button to exit the Pattern Edit module.

To Remove or edit a Tempo Change from the Conductor Track

Select the pattern

you wish to edit.

Press the

Pattern Edit

button.

Press the

(-) Track/Channel

button

until “CT” appears in the track

field.

Press the

Enter

button as prompted by the display to begin editing.

Press the

right Cursor

button twice to move the cursor underneath the

Event Scroll

field (<->).

Turn the

data entry control

to scroll through the event list and locate

the tempo change you want to edit.

Press the front panel

Erase

button on MP-7 to erase the tempo event.

Simply change the

Tempo

Location

fields to modify the tempo or

time of the event.

Press the

Pattern Edit

button to exit the Pattern Edit module.

To Insert or Edit Meter Changes

Meter changes are inserted and edited exactly like tempo changes.

CT EVENT <->

002.03.008

tempo: 120 bpm

BPM field

Time Location

Track field

Tempo/Meter field

CT EVENT <->

002.03.008

tempo: 120 bpm

Event Scroll Field

(scroll though events)

Содержание MP-7 command station





































































































































































































































































































































































































Результаты поиска

Содержание MP-7 command station

Отзывы:

E-Mu MP-7 command station, Руководство пользователя, Страница: 114 / 388

Результаты поиска

Содержание MP-7 command station

Отзывы: