![background image](http://html.mh-extra.com/html/e-mu/emax/emax_owners-manual_518570093.webp)
Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 94
Destination:
(Footswitch)
4
Function:
RELEASE
1. For footswitch-controlled release, first select the footswitch then select 4. Any note played while the
footswitch is pressed will play through its entire length, whether or not you continue to hold down a
key. Looped sections are not repeated unless you hold down the key. Releasing the footswitch
cancels release.
Application:
If you have a Voice with a short release but where there are sounds after the end of the
loop, playing the sound normally will play through to the end of the loop and you will not
hear the sounds that occur after the loop. However, if you press down on the release
footswitch during the loop and remove your finger from the key, the Voice will play
through to the end--including the “after-loop” sounds.
Destination:
(Footswitch)
5
Function:
XSWITCH
1. For footswitch controlled switching between the primary and secondary Preset Voices, first select the
footswitch then select 5. Pressing the footswitch will alternate between the two samples.
Note:
This function must also be enabled under Preset Definition function 5 (Velocity XFade).
Destination: (Footswitch) 6
Function: ADVANCE PRESET
1. To advance via footswitch from one Preset to the next higher numbered Preset (i.e., from Preset 01
to Preset 02), first select the footswitch then select 6. Press the footswitch momentarily to advance to
the next Preset. Advancing past the highest-numbered Preset resets Emax to the lowest numbered
Preset.
Note:
If you advance to a Preset which does not have this destination assigned to one of the
footswitches, you will not be able to advance out of that Preset.
Hint:
Use this function to return the display to the Preset Identifier mode when the sequencer
is playing, enabling you to play different presets while listening to the sequencer.
Note2:
Emax is designed to work with two types of footswitches. If your footswitch seems to
work backwards, refer to Recalibrate located under Special in the Master module.
Содержание EMAX
