E-Mu EMAX, Руководство пользователя

Страница: 50 / 119

Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 51
Module: SAMPLE 7 Function: FORCE SAMPLING
Force sampling lets you initiate sampling manually as an alternative to threshold-sensitive
sampling. This is useful for situations where the signal to be sampled is more or less continuous
(continuous signals greatly complicate the threshold - setting process described in SAMPLE 5
).
1. With the module active and levels properly set, as soon as you are ready to sample key in
7 . Sampling
will begin immediately, and the display will say “Sampling.”
2. After reaching the end of the sample length (if set with
SAMPLE 4) , being stopped manually
( SAMPLE 8 ), or when Emax runs out of memory, the display will return to the Module Identifier.
3. If you are satisfied with the sample, de-activate the module.
Module: SAMPLE 8
Function: STOP SAMPLING
You can end sampling at any time by keying in 8. After sampling, the display will return to the
Module Identifier.
Module: SAMPLE 0
Function: CHANGE CURRENT SAMPLE
If you take consecutive samples without exiting the sample module, each sample will overwrite
the previous sample. However, you can specify a new sample into which a sample will go -- even
without exiting the sample module -- by keying in 0. Emax will default to the next empty sample
number.
1. The display says:
Where XX is the Voice number and YY is the keyboard placement of the sample.
New Sample
Pri XX YY