E-Mu EMAX Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 119

background image

Emax Owners Manual

© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 81

If you choose Positional Crossfade, the display will say:

The selected Voice will become more prominent as you play higher on the keyboard, and the other
Voice will become less prominent.

After making your selection, press

ENTER.

Module: PRESET DEFINITION 6

Function: ARPEGGIATOR SETUP

You’re going to love this arpeggiator: it does a lot and it’s easy to set up. Best of all, arpeggiation
settings are stored with the Preset so that different Presets can have totally different arpeggiation
characteristics. Also, arpeggiation can be assigned to any range of the keyboard or the entire
keyboard, and some arpeggiation parameters can be altered in real time for expressive
arpeggiation.

1. Select the Current Preset; this Preset will contain the arpeggiation information.

2. Activate

PRESET DEFINITION 6

. The display says:

Use the cursor keys to select the various Arpeggiator options or press

ENTER

to jump back to the

Module Identifier. The first arpeggiation option display says:

Select the desired arpeggiator status with the

ON

or

OFF

buttons. To jump back to the Module

Identifier press

ENTER

, otherwise press the right arrow cursor key to continue the setup.

3. The next display says:

Use the data slider or the numeric keypad to adjust the tempo through the range from 40 - 240 Beats
Per Minute. Press the right cursor key to to do fine adjustment to the tempo. Use the data slider or the
numeric keypad to adjust the tempo through the range from .00 - .99 Beats Per Minute.

If you have selected a clock other than the internal clock (see next menu item), the arpeggiator will
follow and display this clock rather than the internal clock.

4. The next menu item chooses the note value; the display says:

Use the data slider to select between the following arpeggiation note values: 1/2 note, 1/4 note, 1/4
triplet, 1/8, 1/8 triplet, 1/16 (default setting), 1/16 triplet, 1/32, 1/32 triplet, and (believe it or not) 1/96
note. The note value can be manipulated in real time. To jump back to the Module Identifier press

ENTER,

otherwise press the right arrow cursor button to continue the setup.

Tempo:

♪

= 120.00

[040-240] Inc/Dec

Arpeggiator: off
Select on/off

Arpeg Setup Menu
Use Cursor Keys

Pri or Sec Voice
On Top: Sec

Note Value: 1/16
Use Data Slider

«
...
78
79
80
81
82
...
»

Содержание EMAX
























































































































Отзывы:

Нет отзывов

Похожие инструкции для EMAX

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды