Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 26
Play ascending keys, one at a time, over the full range of the keyboard. The display will give the
Voice number and the original pitch. Take a minute or two and note where the various Voices begin
and end, and which Voices are at which locations on the keyboard. They should be as follows:
Voice#
Orig.Pitch
Lo Transposition
Hi Transposition
01
G1
C1
A1
02
E2
A#1
G2
03
C3
G#2
C#3
04
E3
D3
F3
05
G3
F#3
A3
06
C4
A#3
C#4
07
E4
D4
F4
08
G4
F#4
C#5
09
E5
D5
F5
10
G5
F#5
C6
Specifying the Analog Processing Module Current Voice
Now we know how many Voices there are in the Preset, and the range covered by each Voice, Let’s
specify a range of Voices to be altered by the Analog Processing Module, starting with the lowest Voice.
This will become the lowest part of the Current Voice.
1. Press a key in the lowest Voice of the range you want to process. For this exercise, press E2. When
the upper display line confirms your choice, press
ENTER
. Since E2 is located within Voice 02, that
Voice becomes the lowest Voice of the Current Voice. Note that you could have pressed any key
within Voice 02 to specify that Voice.
2. The display now shows the highest note of the Voice in which E2 resides. Don’t press
ENTER
yet - -
but if you did, this highest note would set the upper limit of the Current Voice. Instead, let’s make the
Current Voice cover a somewhat wider range. Press C4 (the display will show this as the new high
note) and press
ENTER.
As with selecting the lowest Voice, selecting any key within the highest
Voice makes that Voice the upper range of the Current Voice. Thus, the Current Voice now extends
from V02 to V06, and covers the range from A#1 to C#4.
3. You will now see the Module identifier, which means you’re ready to start modifying the sounds in the
bank with the Analog Processing Module the subject of the next tour.
4. The assigned Current Voice will remain as is, until you change the Current Voice assignment, change
Presets, or load another Bank. If you switch between modules, the Current Voice remains as
assigned (unless you select the Digital Processing Module, which will be a subject of a later tour).
5. Before proceeding, look over
ANALOG PROCESSING 00
to help reinforce what you’ve learned. Now
that you know what a Current Voice is and how to specify it, we’ve reached the end of this tour
(although you may need to come back from time to time to refresh your memory). In the next tour,
we’ll see how to modify Voices with the Analog Processing section.
Содержание EMAX
