E-Mu EMAX, Руководство пользователя

Страница: 114 / 119

Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 115
Module: SEQUENCER SETUP 4 Function: ERASE TRACK
Okay, so that 32nd note bass track wasn’t so cool after all. Here’s how to get rid of it.
1. Select the Current Sequence whose track you want to erase.
2. With the Sequencer Setup module active, select 4. The display shows:
...where XX is the track number that’s about to be erased. Select the track to be erased with the data
slider or keypad; the display’s lower line will show its associated Preset. Press
ENTER . Emax, which
always does what it can to help you prevent embarrassing mistakes, asks “Are You Sure YIN.” If yes,
press YES , otherwise press NO .
Module: SEQUENCER SETUP 5
Function: BOUNCE TRACK
You may bounce a track to any other sequencer track, or even bounce several tracks, one at a
time, into a composite track.
1. Select the Current Sequence whose track you want to bounce.
2. With the Sequencer Setup module active, select 5. The display shows:
...where XX is the track number that’s about to be bounced (source track). Select the source track
(data slider, increment buttons, or keypad), then press
ENTER.
3. The display now shows:
...where XX is the source track number and VY is the destination track number. Select the destination
track number (data slider or keypad) and press ENTER. The source track will be erased, its data will
now be in the destination track, and Emax will return to the Module Identifier.
4. To mix several tracks to one track, repeat steps 2 and 3 and specify the same destination track for
each bounce.
Erase Track XX
Select Track
Bnce TXX
Select Track
Bnce TXX To TYY
Select Track