E-Mu EMAX Скачать руководство пользователя страница 115 | Manualshive

Страница: 115 / 119

background image

Emax Owners Manual

© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 116

Module: SEQUENCER SETUP 6

Function: SUPER MODE

The Emax sequencer does not include some of the features of fancy sequencers (step editing,
auto correction, etc.). However, you can work out sequences on a full-function sequencer and
download the tracks en masse using the Super Mode function. Super Mode also allows Emax to
read all sixteen MIDI channels at once and to route each channel to a different preset. This is
called Super Mode Mapping. These are advanced techniques.

It Is Important to remember that each Emax Track corresponds to a particular MIDI channel. In
other words, Emax Track 5 downloads on MIDI channel 5.

SUPER MODE DOWNLOAD

1. Check that the Emax MIDI IN connects to the external sequencers

MIDI OUT

.

2. Activate

SEQUENCER MANAGE 2

and select MIDI as the clock source.

3. Activate

SEQUENCER SELECT

and select the Current Sequence into which you will download the

tracks.

4. Activate the

SEQUENCER SETUP

module and select 6. The display shows:

Press

ON

to enable Super Mode. Remember to make sure Super Mode Is off (press

OFF

button)

when you’ve finished downloading!

5. Select the tracks you want to download and put them in record mode according to the instructions in

SEQUENCER SETUP 1

. For example, if you want to download five tracks (MIDI channels), place the

five Emax tracks corresponding to each of the MIDI channels into record.

4. Press

RECORD

then

PLAY

on Emax, then put your fancy sequencer into Play mode. In theory, the

sequencer will start Emax and send Its MIDI data through the MIDI OUT into the Emax MIDI IN.
Emax should be set for MIDI clock in. Either stop Emax manually to terminate the downloading
process, or stop the sequencer.

5. Assign the tracks to Presets as desired - Preset MIDI channel information is Ignored - (

SEQUENCER

SETUP 2

), change to Internal Clock (

SEQUENCER MANAGE 2

), and play the sequence to make

sure all is well. If It is, call up

SEQUENCER SETUP 6

, turn off Super Mode, press

ENTER

, and Emax

will return to the Module Identifier.

SUPER MODE MAPPING

Create the SUPER MODE MAP. (This may already be done for you. Check your sequences.)

1 Select a new sequence and record a short blank sequence of any length (Don’t play any notes).

Since each track listens on the corresponding MIDI channel, repeat this process on all tracks you
wish to use.

2. Assign each track to the desired preset using

SEQUENCER SETUP 2

(Track Preset). Assign

unneeded tracks to a blank preset, which is created, by not assigning any voices to a new preset.
This will prevent these unneeded tracks from sounding. That’s it! You now have a Super Mode Map
that you can copy to other sequencer locations and disks. By simply changing sequences, you can
call up a new map!

Super Mode: off
Select on/off

«
...
113
114
115
116
117
...
»

Содержание EMAX
























































































































Отзывы:

Нет отзывов

Похожие инструкции для EMAX

Бренд: Atec Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды