background image

4

5

Inspections or Repairs

If this Product needs to be inspected or repaired, please call for a Return Merchandise Authorization 

(RMA). Pack the Product securely using a shipping carton. Please note that original boxes may be 

included, but are not designed to withstand the rigors of shipping without additional protection. Ship 

via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not 

responsible for merchandise until it arrives and is accepted at our facility. A Service Repair Request is 

available at www.horizonhobby.com on the “Support” tab. If you do not have internet access, please 

include a letter with your complete name, street address, email address and phone number where 

you can be reached during business days, your RMA number, a list of the included items, method of 

payment for any non-warranty expenses and a brief summary of the problem. Your original sales 

receipt must also be included for warranty consideration. Be sure your name, address, and RMA 

number are clearly written on the outside of the shipping carton.

Warranty Inspection and Repairs

To receive warranty service, you must include your original sales receipt verifying the proof-of-

purchase date. Provided warranty conditions have been met, your Product will be repaired or replaced 

free of charge. Repair or replacement decisions are at the sole discretion of Horizon Hobby.

Non-Warranty Repairs

Should your repair not be covered by warranty the repair will be completed and payment will be 

required without notification or estimate of the expense unless the expense exceeds 50% of the retail 

purchase cost. By submitting the item for repair you are agreeing to payment of the repair without 

notification. Repair estimates are available upon request. You must include this request with your 

repair. Non-warranty repair estimates will be billed a minimum of ½ hour of labor. In addition you 

will be billed for return freight. Please advise us of your preferred method of payment. Horizon accepts 

money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover 

cards. If you choose to pay by credit card, please include your credit card number and expiration 

date. Any repair left unpaid or unclaimed after 90 days will be considered abandoned and will be 

disposed of accordingly. Please note: non-warranty repair is only available on electronics and model 

engines.
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center 

4105 Fieldstone Road 

Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support 

4105 Fieldstone Road 

Champaign, Illinois 61822

Please call 877-504-0233 with any questions or concerns regarding this Product or warranty.

Limited Warranty

(a) This warranty is limited to the original Purchaser (“Purchaser”) and is not transferable. REPAIR 

OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE 

PURCHASER. This warranty covers only those Products purchased from an authorized Horizon dealer. 

Third party transactions are not covered by this warranty. Proof of purchase is required for warranty 

claims. Further, Horizon reserves the right to change or modify this warranty without notice and 

disclaims all other warranties, express or implied.
(b) Limitations- HORIZON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, 

ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF 

THE PRODUCT. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT 

THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
(c) Purchaser Remedy- Horizon’s sole obligation hereunder shall be that Horizon will, at its option, (i) 

repair or (ii) replace, any Product determined by Horizon to be defective. In the event of a defect, these 

are the Purchaser’s exclusive remedies. Horizon reserves the right to inspect any and all equipment 

involved in a warranty claim. Repair or replacement decisions are at the sole discretion of Horizon. 

This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, 

abuse, negligence, commercial use, or modification of or to any part of the Product. This warranty 

does not cover damage due to improper installation, operation, maintenance, or attempted repair by 

anyone other than Horizon. Return of any goods by Purchaser must be approved by Horizon before 

shipment.

Damage Limits

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, 

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH 

THE PRODUCT, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, 

OR STRICT LIABILITY. Further, in no event shall the liability of Horizon exceed the individual price of 

the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, 

modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. 

By the act of use, setup or assembly, the user accepts all resulting liability.
If you as the Purchaser or user are not prepared to accept the liability associated with the use of this 

Product, you are advised to return this Product immediately in new and unused condition to the place 

of purchase.
Law: These Terms are governed by Illinois law (without regard to conflict of law principals).

Safety Precautions

This is a sophisticated hobby Product and not a toy. It must be operated with caution and common 

sense and requires some basic mechanical ability. Failure to operate this Product in a safe and 

responsible manner could result in injury or damage to the Product or other property. This Product 

is not intended for use by children without direct adult supervision. The Product manual contains 

instructions for safety, operation and maintenance. It is essential to read and follow all the instructions 

and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid 

damage or injury.

Questions, Assistance and Repairs

Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once 

assembly, setup or use of the Product has been started, you must contact Horizon directly. This will 

enable Horizon to better answer your questions and service you in the event that you may need any 

assistance. For questions or assistance, please direct your email to productsupport@horizonhobby.

com, or call 877.504.0233 toll free to speak to a service technician.

Содержание Blade 400 3D


























Отзывы: