E-FLITE Blade 400 3D, Руководство пользователя

Страница: 10 / 25

18 19
Then, plug the battery into the battery lead of the ESC.
Position the helicopter to view it from the left or right side. Move the left-hand stick up and down to
check the collective pitch control. When the stick is pushed up, the swashplate should lower, increasing
the pitch of the main blades.
With the stick pulled back down, the swashplate should raise, decreasing the pitch of the main blades.
Again viewing the helicopter from the left or right side, move the right-hand stick forward and aft to
check elevator pitch control. When the stick is pushed forward, the swashplate should also tilt forward.
With the stick pulled back, the swashplate will tilt toward the rear.
While viewing the helicopter from the rear (tail boom toward you), move the right-hand stick left and
right to check aileron roll control. When the stick is pushed to the left, the swashplate should also tilt
left.
With the stick pushed right, the swashplate will tilt to the right.
While viewing the helicopter from the rear (tail boom toward you), move the left-hand stick left and
right to check rudder/tail rotor pitch control. When the stick is pushed to the left, the tail pitch slider
should move to the right.
With the stick pushed right, the tail pitch slider should move to the left.