E.F. Johnson Company 242-20X1-213 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 198

background image

1-3

October 1995

Part No. 001-2008-202

VIKING

®

VX

VHF LTR REPEATER

PART NO. 242-20X1-213

Copyright



2000 by the E.F. Johnson Company

The E.F. Johnson Company designs and manufactures two-way radio equipment to serve a wide variety of communications
needs. Johnson produces equipment for the mobile telephone and land mobile radio services which include business, indus-
trial, government, public safety, and personal users.

LAND MOBILE PRODUCT WARRANTY

The manufacturer’s warranty statement for this product is available from your product supplier or from the E.F. Johnson Com-
pany, 299 Johnson Avenue, Box 1249, Waseca, MN 56093-0514. Phone (507) 835-6222.

WARNING

This device complies with Part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harm-
ful interference. In addition, changes or modification to this equipment not expressly approved by E. F. Johnson could void
the user’s authority to operate this equipment (FCC rules, 47CFR Part 15.19).

DO NOT allow the antenna to touch or come in very close proximity with the eyes, face, or any exposed body parts while the
radio is transmitting.

To comply with FCC RF exposure limits, DO NOT operate the transmitter of a stationary radio (base station or marine radio)
when a person is within four (4) meters of the antenna.

DO NOT operate the radio in explosive or flammable atmospheres. The transmitted radio energy could trigger blasting caps or
cause an explosion.

DO NOT operate the radio without the proper antenna installed.

DO NOT allow children to operate transmitter equipped radio equipment.

NOTE: The above warning list is not intended to include all hazards that may be encountered when using this radio.

SAFETY INFORMATION

The FCC has adopted a safety standard for human exposure to RF energy. Proper operation of this radio under normal
conditions results in user exposure to RF energy below the Occupational Safety and Health Act and Federal Communication
Commission limits.

The information in this document is subject to change without notice.

E.F. Johnson Company will not be liable for any misunderstanding due to misinformation or errors found in this
document.

LTR, LTR-Net, Multi-Net, Viking Head/EFJohnson Logo, Call Guard and SUMMIT are registered trademarks of E.F. Johnson
Company All other company and/or product names used in this manual are trademarks and/or registered trademarks of their
respective manufacturer.

«
1
2
3
4
5
...
»

Содержание 242-20X1-213







































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 242-20X1-213

Бренд: Pelonis Страницы: 24

Бренд: Bionaire Страницы: 8

Бренд: QualityCraft Страницы: 10

Бренд: ARDES Страницы: 28

Бренд: Eco Heat Страницы: 2

Бренд: Rowley Страницы: 6

VISION COMPACT VC40

Бренд: Ambirad Страницы: 20

Бренд: SOLE Страницы: 14

home FKIR 351 WIFI

Бренд: Somogyi Elektronic Страницы: 32

Бренд: Niko Страницы: 8

Бренд: Inovonics Страницы: 5

Бренд: Raytheon Страницы: 46

Бренд: Warmtech Страницы: 26

Бренд: Klarstein Страницы: 56

Бренд: MO-EL Страницы: 36

Бренд: Klarstein Страницы: 56

Бренд: L.B. White Страницы: 128

Бренд: Hyundai Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды