E.F. Johnson Company 242-20X1-213, Руководство пользователя

Страница: 37 / 198

SOFTWARE
3-3
August 2000
Part No. 001-2001-200
If you have a single floppy drive and no hard disk
drive, you need to create programming disks. The rea-
son for this is that there is not adequate space on the
backup disk(s) for storing radio files. If your com-
puter has dual floppy disk drives, the backup disk can
be placed in one drive and then the radio files stored
on a disk in the second drive.
To make a programming disk, format a blank disk
using FORMAT B: or FORMAT B: /S (use "/S" if it
must be a bootable disk). Then copy the required pro-
gram file or files to the programming disk. To do this,
type COPY A:(filename.ext) B:(filename.ext). For
example, to copy the file 2004pgm2.exe from drive A
to drive B, type
COPY A:2004pgm2.exe B:2004pgm2.exe
This procedure works for either single or dual drive
computers. Refer to your computer reference manual
for more information on these DOS commands.
The programming software is shipped in a com-
pressed format. The name of the compressed file is
2000pgm2.exe and it extracts the following files so the
program can be used on a PC.
VHF_PGMR.EXE 488K
VHF_PGMR.HLP 46K
VHF12LMN.HLP 2K
VHF_PGMR.LNF 181K
VHF12HMN.LNF 11K
VHF12LMN.LNF 278K
VHF12LUS.LMF 59K
VHF25HMN.LNF 11K
VHF25LMN.LNF 270K
VHF25LUS.LMF 62K
The 2004PGM2.EXE file is self extracting which
means that the files extract automatically when exe-
cuted. To extract these files so the program can be
used, first make the current directory the destination
directory for these files. For example, to make it the
\RADIOPRG directory on drive C: (if not the current
directory), type C: (Return) and then CD \RADIOPRG
as just described. To make it the disk in drive B:, sim-
ply type B:. Then insert the program disk in drive A:
and type A:2004PGM2 (or B: 2004PRM2 if drive B:
is being used). The program files are automatically
extracted into the current directory or disk.
3.2.2 MINIMUM FREE MEMORY REQUIRED
Approximately 560K of free conventional mem-
ory is required to run this program (use the CHKSK or
MEM command to display the amount of free mem-
ory). If you have at least 640K of memory and not
enough is available, there may be other programs that
are also being loaded into conventional memory. Con-
tact Customer Service for information on how these
programs can be moved or disabled to make more
space available.
3.3 REPEATER PROGRAMMER
When the program is loaded into the computer
and executed, the menu shows the files available from
the directory. The program is used to create, edit,
transfer and receive the repeater and channel parame-
ters described in Section 5.
IMPORTANT
The commands and displays referred to in this
manual are for the IBM PC and may differ from IBM
compatible. Refer to the computer’s operating system
manual for command explanations.
3.3.1 PROGRAM FILES
The files in the software directory are needed to
run the program.
3.4 ALIGNMENT SOFTWARE
Figure 3-1 REPEATER TEST MENU
The software for the VIKING VX repeater pro-
grams the MPC to open and close the audio/data gates
necessary for the alignment selected from the Test-Full
File Edit Transfer Hardware Test Utilities
PA
Receiver
Exciter
RNT Interface
Full Rptr/Station
Telephone Interface
VNC Interface