P/N: 975389
|
Rev: current
|
ECO: xxxxx
www.dynisco.com
From lab to production,
providing a window into the process
-7-
Avoid tipping the stand
After assembling the stand, install the RCU on the stand before installing the RSU.
Installing the RSU to the stand before installing the RCU can make the stand unstable. Take
care to follow this assembly order unless the stand has been properly secured.
The optional stand has flexible configuration capability. It is possible to configure it is such
a way that it is unstable. Take care not to use it this way unless it is properly secured.
Take care to avoid tipping the stand due to an impact (from something/somebody running
into the stand), or from a collision (a forklift or crane load, etc being driven into it), or while
moving the stand. Do not climb on or support yourself with this stand. Use signs or
barriers as appropriate.
When moving the stand around on its castors, there is danger that it could suddenly stop
sharply when it rolls over uneven floor surfaces or other obstructions (screws, granules),
and could tip. Appropriate caution must therefore be taken - roll the unit slowly!
The castors on the base of the stand must be examined regularly for damage and secure fit,
damaged castors are to be replaced immediately.
2.2
Obligation of the operator to exercise due care
The Dynisco component conforms to the state of the art technology and ensures a
maximum of safety. In practical operation, this safety can, however, be achieved only if all
necessary measures are taken. The obligation of the plant operator to exercise due care
includes planning these measures and supervising their execution.
Especially, the operator has to ensure that:
•
The Dynisco component will be used only in accordance with the intended purpose.
•
The Dynisco component will be operated in a flawless, functionally efficient
condition and that, in particular, the functional efficiency of the safety devices will
be checked at regular intervals.
•
The necessary personal protective equipment for the operating, maintenance, and
service personnel will be available and used by them.
•
The operating instructions are always available completely and fully legibly at the
installation location of the Dynisco component. It must be guaranteed that all
persons who have to work with the Dynisco component can consult the operating
instructions at any time.
Содержание ViscoIndicator
Страница 20: ...P N 975389 Rev current ECO xxxxx www dynisco com From lab to production providing a window into the process 20 ...
Страница 28: ...P N 975389 Rev current ECO xxxxx www dynisco com From lab to production providing a window into the process 28 ...
Страница 38: ...P N 975389 Rev current ECO xxxxx www dynisco com From lab to production providing a window into the process 38 ...
