Dynisco TX180, Инструкция по установке и эксплуатации

Страница: 8 / 52

8
Fig. 2 Optional DIN Rail Mounting Bracket
2.2.2.2 H
EAD
M
OUNTING
For head mounting, all the Explosion Proof / Weatherproof housings can be used for head mounting.
All heads have two 1/2" female NPT conduit entries. One of these conduit entries can be used to
mount directly onto a 1/2" male NPT extension of sensor. Alternatively, a 1/2" NPT union coupling
can be placed between the weatherproof housing and the temperature sensor. These heads are
shown in Figure 3. Note that the XP-HEAD and WP-HEAD cannot be used with a pipe mount
bracket. For non-display pipe mount bracket installations, use the XP-FN Housing.
Fig. 3 The XP-FG with Bracket and WP-HEAD
2.2.2.3 S
URFACE
M
OUNTING
The transmitter has two mounting holes through the body of the transmitter. These mounting holes
allow the transmitters to be attached to any flat surface by means of two bolts or screws. The
transmitter is provided with 8/32 captive screws already installed.