Dynaset HG 1 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 72

Dynaset HG 1 Скачать руководство пользователя страница 58

Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | [email protected] | www.dynaset.com

58

HYDRAULIC GENERATORS

WARRANTY

8. Exclusions from warranty

This warranty shall not apply to:

• Failures due to normal wear and tear, improper installation, misuse, abuse, neg-

ligence, purchaser selection of improper product to intended use, accident,

improper filtration of hydraulic oil or intake water or lack of maintenance.

• Cost of maintenance, adjustments, installation or startup.

• Coating, hydraulic oil, quick couplings and interconnection hoses (internal or

external to system assemblies).

• Products altered or modified in a manner not authorized by DYNASET OY in

writing.

• Products which have been repaired during warranty period by others than

DYNASET OY or its authorized workshop.

• Costs of any other damage or loss, whether direct, indirect, incidental, special

or consequential, arising out of the use of, or the inability to use, the product.

• Telephone or other communications expense.

• Product that is used in exceptional conditions, considered to cause excessive

wear and tear.

• Faults caused by nature phenomenon’s like flood, thunder, etc.

© DYNASET OY, all rights reserved

«
...
56
57
58
59
60
...
»

Содержание HG 1









































































Отзывы:

Нет отзывов