Dynaset HG 1, Руководство пользователя, Страница: 41 / 72

Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
41
HYDRAULIC GENERATORS
INSTALLATION
4.7.1. CABLE CONNECTIONS
ATTENTION!
The customer is responsible of the connection of the cable and
safety devices in accordance with the local laws, regulations and
recommendations issued by local electricity and work safety authorities.
The connection to the generator must be done in following manner.
1. Check first the voltage from the type plate on the generator
2. Check the generator product series mark from thegenerators identification key
found in the type plate.
3. Select correct connection type from list below based on the voltage and product
series
4. Make the connection
ATTENTION!
Connections variate with different generator voltages and product series.
Using incorrect connection may damage the generator. If you have
questions about the cable connection take contact to Dynaset or nearest
Dynaset dealer.
FREQUENCY 1~PHASE / 3~PHASE
GENERATOR
PRODUCT SERIE*
1
50 Hz 230 / 400, 220 / 380, 240 / 415, 254 / 440 C, H, I, J, P, Y
60 Hz 240 / 415, 254 / 440, 266 / 460, 277 / 480 C, H, I, J, P, Y
*Product series is presented in the identification key. Read chapter 1.2 for more information.