Dynaset HG 1, Руководство пользователя, Страница: 45 / 72

Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
45
HYDRAULIC GENERATORS
OPERATION
5. OPERATION
ATTENTION!
Always check the HG hydraulic generator and its hoses condition before
use to ensure there are no leaks or damages.
5.1. CONNECTING THE APPLIANCE
After ensuring the proper operation of DYNASET HG hydraulic generator,
appliances can be connected. Appliance can be any electrical device e.g. work
lamp, grinder, welder etc.
Avoid starting the HG generator with a appliance connected to it.
NOTE!
It is recommended to use a UPS(uninterruptable power source) with
electrical equipment such as computers to protect them from power
surges and spikes.
1. Connect the Hydraulic pressure line (P) and return line (T) to the HG hydraulic
generator into their corresponding places.
2. Start your base machine. When the engine of the base machine is running and
the hydraulic flow is available, the HG can be started by opening the hydraulic
flow to it.
3. Connect your appliance to the generator.
Picture 33: Connecting load to the HG hydraulic generator