Dynapac PL350 TD, Инструкция по эксплуатации

Страница: 78 / 107

Maintenance - Maintenance schedule
IPL350TD-1EN2.pdf 2012-06-18
Every 500 hours of operation (Every three
months)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig Action Comment Pos.
in fig Action Comment
3 Change the engine fuel filter Refer to the engine manual 3 Change the engine fuel filter Refer to the engine manual
6 Check hydraulic reservoir cap/vent 6 Check hydraulic reservoir cap/vent
Check hydraulic hoses Replace if necesssary Check hydraulic hoses Replace if necesssary
13 Empty and clean water tank 13 Empty and clean water tank
1,2 Change engine oil and oil filter Refer to the engine manual 1,2 Change engine oil and oil filter Refer to the engine manual
Every 1000 hours of operation (Every six
months)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig Action Comment Pos.
in fig Action Comment
3 Check engine valve clearances Refer to the engine manual 3 Check engine valve clearances Refer to the engine manual
9 Replace coolant 9 Replace coolant
16 Check visible screws/nuts, planetary gear/drive wheel Tighten if necessary 16 Check visible screws/nuts, planetary gear/drive wheel Tighten if necessary
Every 2000 hours of operation (Yearly)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig Action Comment Pos.
in fig Action Comment
11 Drain and clean the fuel tank 11 Drain and clean the fuel tank
6 Change the hydraulic fluid 6 Change the hydraulic fluid
2 Replace return fluid filter, suction side 2 Replace return fluid filter, suction side
16 Change oil in planetary gear, drive wheel 16 Change oil in planetary gear, drive wheel
4 Replace high-pressure hydraulic fluid filter 4 Replace high-pressure hydraulic fluid filter
70