Dynapac PL350 TD, Инструкция по эксплуатации

Страница: 103 / 107

Maintenance - 2000h
IPL350TD-1EN2.pdf 2012-06-18
Return oil filter suction side
Replacement
Fig. Control console
3. Warning lamp, return fluid filter, suction
side
3
The hydraulic system's return fluid filter is located on
the hydraulic reservoir behind the engine
compartment's right-hand service panel, and must be
replaced every 2000 h or once/year, or when the
warning lamp on the instrument panel (3) lights up red.
Fig. Engine compartment, left
1. Filter housing cover
1
Fig. Filter unit
2. Handle
2
- Undo the filter housing cover (1).
- Lift out the complete filter unit from the housing and
remove the handle (2) from the used filter unit.
Remove the filter and hand in to waste disposal
station. This is a disposable filter and cannot be
cleaned. Remove the filter and hand in to waste disposal
station. This is a disposable filter and cannot be
cleaned.
- Fit the handle on the new filter unit and put the
complete filter insert in the filter housing.
- Refit the filter housing cover.
95