INSTRUCTION
MANUAL
PORTABLE
CD
RADIO
PLAYER
WARNING
：
TO
AVOID
THE
HAZARDS
OF
FIRE
OR
ELECTRICAL
SHOCK
；
DO
NOT
EXPOSE
THIS
APPLIANCE
TO
RAIN
OR
OTHER
MOISTURE
．
＊
Design
and
specifications
subject
to
change
without
notice
．
CAUTION
：
TO
REDUCE
THE
RISK
OF
ELECTRIC
SHOCK.
DO NOT REMOVE COVER,
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK
OF
ELECTRIC
SHOCK
DO
NOT
OPEN
This
symbol indicates that
dangerous voltage corresponding
a risk of electric shock is
presence within this unit.
This
symbol indicates that
there are important operating
and maintenance instructions
in the literature accompanying
this unit.
！
！
REPEAT PLAY - SINGLE SONG
To repeat the SAME song over and over again, do the following:
1. Select the song you want to repeat, press the Repeat Button once.
2. The repeat lamp will flashing. Then press PLAY/PAUSE button to start.
3. To stop the repeat function, press Repeat Button twice.
REPEAT PLAY - ALL SONGS
To repeat ALL SONGS on a disc, do the
1. Press Repeat Button twice during playback. The repeat lamp will be steady on.
2. All the songs on the CD will play in order and
start all over again. To stop the repeat
then
function, press Repeat Button once.
following:
PROGRAMMED PLAY
Up to 20 tracks can be programmed for disc play in the order you like.
1. Press Program Button when CD has stopped.
2. Press the Search/Skip Buttons either or until the desired track shows on the
Display.
3. Press the Program Button to store the first track.
4. Repeat steps 2 and 3 until all the desired tracks are programmed.
NOTE: Programming can only be done when the CD is in the stop mode.
SRCD302
SPECIFICATIONS
Radio Frequency range: AM 530~1710KHz
FM 88~108MHz
10%THD Power output 1W
8xUm2
Power source: AC120V-60Hz,12Watts
×2
Speaker impedance: 8ohm
Battery operation: DC12V
