Dynapac CP275, Инструкция по эксплуатации

Страница: 99 / 115

Maintenance – 1000h
91
4812273203.pdf
2017-08-25
Fig. Air cleaner
1. Clips
2. Cover
3. Main filter
4. Backup filter
5. Filter housing
6. Dust valve
Maintenance – 1000h
Park the roller on a level surface.
When checking and making adjustments to the
roller, switch the engine off and make sure the
Forward/Reverse lever is in the Neutral position.
Ensure that there is good ventilation (air
extraction) if the engine is run indoors.
Risk of carbon monoxide poisoning.
Air cleaner
Checking – Change the main air filter
Change the air cleaner main filter when
the warning lamp on the control panel comes on
when the engine is running at maximum speed.
Release the clips (1), pull off the cover (2), and pull out
the main filter (3).
Do not remove the backup filter (4).
Clean the air cleaner if necessary, see section Air
cleaner – Cleaning.
When replacing the main filter (3) insert a new filter
and refit the air cleaner in the reverse order.
Check the condition of the dust valve (6); replace if
necessary.
When refitting the cover, make sure that the dust valve
is positioned downwards.