Dynapac CP275, Инструкция по эксплуатации

Страница: 68 / 115

Maintenance –Maintenance schedule
60
4812273203.pdf
2017-08-25
Pos.
in fig
Action Comment
Before starting up for the first time to start
that day
1 Check the engine oil level Refer to the engine manual
5 Check hydraulic oil level
8 Check the engine coolant level Refer to the engine manual
10 Refuel
11 Check the scraper setting
12 Fill the water tanks
13 Check the sprinkler system
13 Sprinkler system - Freeze risk/protection
Check brake fluid level
Check the tire pressure
Test brake
General
Periodic maintenance should be carried out after the
number of hours specified. Use the daily, weekly etc.
periods where number of hours cannot be used.
Remove all dirt before filling, when
checking oils and fuel and when lubricating using
oil or grease.
The manufacturer’s instructions found in
the engine manual also apply.
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of the
sections referred to!