Dynapac CP275, Инструкция по эксплуатации

Страница: 61 / 115

Operating instructions - summary
53
4812273203.pdf
2017-08-25
Operating instructions - Summary
1. Follow the SAFETY INSTRUCTIONS specified in the Safety Manual.
2. Make sure that all instructions in the MAINTENANCE section are
followed.
3. Turn the master switch to the ON position.
4. .Move the forward/reverse lever to NEUTRAL position, stop the
machine.
5. Set the Emergency stop in the pulled-out position. The machine
always starts in Highspeed mode.
6. Start the engine and allow it to warm up.
7. Move the forward/reverse lever to the NEUTRAL position.
8. Operate the roller. The Forward/Reverse lever gives the required
direction of travel. Use the accelerator carefully.
9. Test the brakes. Remember that the braking distance will be longer
if the hydraulic fluid is cold.
10. Check that the tires are thoroughly sprinkled when this is
necessary.
11. IN AN EMERGENCY:
- .Activate the brake pedal.
- Press the EMERGENCY STOP.
- Hold the steering wheel firmly.
- Brace yourself for a sudden stop.
12. When parking:
- Move the forward/reverse lever to position “N”.
- Stop the engine and chock the wheels.
13. When lifting: - Refer to the relevant section in the Instruction
Manual.
14. When towing: - Refer to the relevant section in the Instruction
Manual.
15. When transporting: - Refer to the relevant section in the
Instruction Manual.
16. When recovering - Refer to the relevant section in the Instruction
Manual.