Dynapac CP275, Инструкция по эксплуатации

Страница: 38 / 115

Machine description
30
4812273203.pdf
2017-08-25
Using the cab controls
Defroster
To quickly remove ice or mist, make sure that only
the front and rear air nozzles are open.
Turn the heater and fan dial (1 and 2) to max.
Adjust the nozzle so that it blows on the window to
be be-iced, or to remove mist.
Heat
If the cab is cold, open the lower nozzle on the
front columns and the middle nozzles just over the
controls for the heater and fan.
Turn to max heat and max fan speed.
When the required temperature has been
reached, open the other nozzles and if necessary
turn down the heat and fan speed.
AC
NOTE: When using AC all the windows must be
closed for the system to work efficiently.
To quickly reduce the temperature in the cab,
adjust the following settings on the control panel.
Turn on AC (3) and set the fresh air (4) in the lower
position to switch off the fresh air valve.
Set the heater control (1) to minimum and turn up
the fan speed (2). Keep only the front middle
nozzles in the ceiling open.
When the temperature has dropped to a
comfortable level, adjust the required temperature
on the heater control (1) and reduce the fan speed
(2).
Now open the remaining nozzles in the roof to
achieve a comfortable temperature in the cab.
Reset the fresh air button (4) to the upper position
for fresh air.