Dynapac CC 82, Руководство по обслуживанию

Страница: 24 / 27

22 CC82/92 M092EN3
Beware of the risk of freezing in the winter.
Drain the tank, pump and piping.
Disconnect the hose (1) at the filter to drain the tank.
Clean the inside of the tank with water and a suitable
detergent for plastic material.
Refit the hose and clean the water filter (2). Fill the tank
with water and check that the sprinkler is working.
Fig. 34 Space under the floor
1. Tank hose
2. Water filter
3. Water pump
Fig. 33 Fuel tank
1. Manhole cover
2. Return lead
1
2
Fuel tank – Cleaning
It is easiest to clean the tank when it is almost empty.
Pump out any bottom sediment with a suitable
pump; for example, an oil emptying pump.
Save the oil in a can and dispose of it in an
approved manner.
Remember the danger of fire when hand-
ling fuel.
Remove the manhole cover (1).
Clean the inside of the fuel tank using a high-pressure
washing jet, or by other suitable means, and remove
any deposits. Wipe dry.
Fill with diesel fuel and check that all connections are
tight.
If necessary, use the hand-operated pump on the left
side of the engine to pump fuel through the system to
the tank via the return lead (2).
The water tank is made of plastic (polythene)
and is recyclable.
Water tank – Cleaning
1 2
3
The fuel tank is made of plastic (polythene)
and is recyclable.
EVERY 2000 HOURS OF OPERATION (Yearly)
Steering joint – Check
Fig. 35 Steering joint
Inspect the steering joint to detect any damage or
cracks.
Check and correct any loose bolts.
Check also for any stiffness and play.
WARNING
CAUTION
CAUTION