Dynapac CC 82, Руководство по обслуживанию

Страница: 14 / 27

12 CC82/92 M092EN3
Scrapers
– Checking, adjustment
Check that the scrapers are undamaged. Adjust the
scrapers as follows, if needed:
To set the scraper harder, loosen the lock nut (2) and
turn the adjusting nut (1) clockwise to the desired
setting.
Tighten the lock nut against the mounting bracket (3) to
fix the setting.
Adjust the tension on both scraper mountings.
To set the scraper looser, adjust in the reverse order to
the above.
The scrapers can suitably be released from the drum
for transport driving, ie, by raising the scraper with the
handle (4) and the catch (5).
3 1
2
5 4
Fig. 9 Front scraper in transport mode
1. Adjusting nut
2. Lock nut
3. Mounting bracket
4. Handle
5. Catch
6 9
Fig. 10 Instrument panel
6. Reserve/parking brake knob
9. Brake warning lamp
Brakes – Check
Check operation of the brakes as follows:
Drive the roller slowly forward.
Push in the reserve/parking brake knob (6).
The brake warning lamp (9) on the instrument panel
should light and the roller should stop.
After testing the brakes, set the forward/reverse lever
in neutral.
Pull up the reserve/parking brake knob.
The roller is now ready for operation.
EVERY 10 HOURS OF OPERATION (Daily)
Fig. 8 Engine hood
1. Cooling-air grille/engine
2. Cooling-air grille/oil cooler
Air circulation – Checking
Ensure that circulation of cooling air to the diesel
engine through the protective grille on the engine hood
is unrestricted.
1
2
WARNING