Dynapac CC 82, Руководство по обслуживанию

Страница: 12 / 27

10 CC82/92 M092EN3
Fig. 2 Diesel engine
1. Dipstick
2. Filler cap
Turn the engine hood catch and open the hood forward.
Ensure that the engine hood is fully open.
Check the oil level with the dipstick (1). The level
should be between the two marks. If the level is close
to the lower mark, top up with fresh engine oil through
the filler cap (2). See under the heading Lubricants for
the correct grade of oil.
Never fill too much oil, it may damage the
engine.
Fig. 4 Right-hand side in engine
compartment
1. Filler hose
Top up with fresh hydraulic fluid through the filler hose
(1), until the level is visible in the sight glass.
See under the heading Lubricants for the correct grade
of fluid.
Diesel engine
– Checking the oil level
2
Fig. 3 Hydraulic reservoir
1. Sight glass
Hydraulic reservoir
– Checking the level
1
1
1
Wipe the sight glass (1). Make sure that the oil level is
between the max. and min. marks.
Hydraulic reservoir
– Topping up
EVERY 10 HOURS OF OPERATION (Daily)
Place the roller on a level base. The engine
must be switched off and the reserve/
parking brake knob pushed in for all check-
ing and adjustments on the roller unless
otherwise specified.
WARNING
WARNING
CAUTION