Dynamica HALO DB-20, Инструкция по эксплуатации

Страница: 78 / 120

Name
Sample name.
Up to eight characters are specifiable. It can input “0-9”, “A-Z”, “-”, “/”,
“:”.
Path length (mm)
When measurement was preformed using a cell other than 10 mm
rectangular cell, the photometric value can be converted into one measured
with a 10 mm rectangular cell.
3. Print Setup
Press <3> to select system setup from the Wavelength Sub Menu and a sub
menu list will appears on the right side of the screen as shown in the illustration
below.
11/10/02 13:29 600.0 nm 0.854 ABS
Time Scan
1 Parameter Setup 1 Printer Type ESC/P
2 Sample Setup 2 Auto Print ON
3 Print Setup 3 Graph Print ON
4 System Setup 4 Data Print Peak
5 Save Parameter 5 List Interval (nm) 10.0
0 Forward
Select Function: _
Printer Type
There are three kinds of printer to select: EPSON, Seiko, HP.
Auto Print
If the Auto print function is “ON”, the DB-20 will print automatically the
setting parameter and the graph or data after completion of a measurement.
But if the Auto print function is “OFF”, the instrument will not print
automatically.
Graph Print
Using this parameter to determine whether to output the on-screen spectral
graph onto the printer automatically at the end of wavelength scanning.
3-37