DynaGen TG410, Руководство пользователя

Страница: 23 / 67

Using the Controller
22
© 2017 DynaGen Technologies Inc TOUGH Series Manual
3 Using the Controller
The LCD display is the primary source of information from the controller. It allows you to view/change settings and monitor the
status of sensors and other engine peripherals.
LCD Display
Using the Menu System
Task Description
Entering Menu When in the OFF mode, press the enter button to bring up the menu.
Navigating Menu Once in the menu, use the up and down arrows to navigate. Pressing enter will move you into
that menu.
Change a Setting Scroll to the desired value and press enter to select. A check mark should appear beside that
item. Press enter again to save the setting and return to the previous screen.
Scroll Parameters When in Auto or Running mode, pressing the up and down arrows will scroll through the
parameter pages.
Lock Screen When in Auto or Running mode, the screen can be locked to a certain parameter page by
pressing Enter and unlocked by pressing Enter again.
Events History Once in the menu, select Events History to view the most recent controller event. Use the up
and down arrows to navigate to other events. The controller can store up to 150 events. If more
than 150 events occur, the oldest event is deleted to make room for the next event.
Front Panel Items
Item Name Description
Off Button Used for turning off the engine or exiting out of Auto mode. This is not
intended to function as an Emergency Stop as there are conditions in which
it will not shut down the engine. See the
OFF Button Function section for
more information.
Auto Button Used for placing the controller into AUTO mode . Once in AUTO mode, the
controller waits for a start command to be received.
Run Button Used to start the engine manually. The Off button must be used to shut
down the engine if it has been started using the front panel.
Up Button Used for moving around in the menu, changing a setting's value, or changing
the currently displayed parameter page.
Enter Button Used for entering the menu system, accepting settings, or locking the LCD
screen when viewing parameters .
Down Button Used for moving around in the menu, changing a setting's value, or changing
the currently displayed parameter page .
Generator/Engine LED Green = Engine running with no issues
Amber = Engine running with warnings
Red = Engine shut down on failure