48
RMO60TD
Error Messages
8.6 Error Message "Mains Voltage < 90V"
This message is displayed when RMO60TD
’s mains voltage is below 90 V.
In this case, to reset the status message you must restart RMO60TD.
8.7
Error Messages "Error printer" and "Check paper"
The message "Error printer"
is displayed if hardware error is apparent at the printer. Check weather
black shaft is in proper position. If yes and the error occurs repeatedly, please contact DV-Power (refer
to
section ”Manufacturer Contact Information”).
The message "Check paper"
is displayed if the printer is out of paper.
The paper roll should be aligned with the paper intake without horizontal offset, and central axis of the
paper roll must be parallel with the printer, as shown at Figure 8-7. Also, pay attention to insert paper in
proper way to the printer, since it must enter paper intake from the lower side of paper roll.
In case that the paper is not properly aligned, black shaft should be pulled up to loose the paper (see
Figure 8-7). After that, align the paper and push down black shaft in proper position.
Figure 8-5:
Error message
"Mains Voltage < 90V"
Figure 8-7:
Paper loading
Figure 8-6:
Error messages
"Error printer" and
"Check paper"
