DV Power RMO60TD Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 50

background image

39

RMO60TD DV-Win Software

Merge files

In  the  case  when  the  operator  wants  to  merge  two  .tcp  files  into  one  master  file  (one  diagram)  it  is
possible by using the Merge files button. Firstly open one .tcp file (if it is not already open), then press
Merge  files  button  and  browse  and  select  the  second  file  from  your  PC.  When  you  save  the  new  file
under the new name, those two files/diagrams will be merged in one diagram. The new graph will open
in  a  new  window.  This  function  is  useful  when  the  test  is  stopped  for  some  reason  and  the  user  later
wishes to continue the test from the point (tap position) where it is stopped.

Cursors

The cursors are enabled by checking Cursor 1 and/or Cursor 2 check boxes. When enabled, each cursor
shows time and current values of the cursor position. If both cursors are enabled, then the time and
current difference are also displayed. Cursor

’s movement is done by holding the left mouse button and

dragging the cursor along the graph.

Using mouse for Zoom function

Zoom In/Zoom Out function is possible using the mouse. If no cursors are displayed, then drag around
the area on the graph using the left mouse button. If cursors are displayed Shift + left mouse button is
used.

Using keyboard for Zoom function

Zoom In/Zoom Out function is possible using the keyboard. The up arrow is used to zoom it in, although
down arrow is used to zoom out the graph.

Pan function

Pan function is enabled by holding the Ctrl key, holding the left mouse button and dragging the plot area
to desired direction. The same function can be accomplished using the Ctrl key and using the
left/right/up/down arrow keys.

Overlay graphs

Overlay graphs feature allows DV-Win to the AC motor current graph vertically. By moving the slider left
or right, the graph can be moved closer or further away from the dynamic resistance measurement
graph.

Toolbar of the grid

Save

DV-Win enables the user to create Test Reports which contain all the necessary testing information.
When Save button is selected, a new window will appear which shows a report preview.

«
...
37
38
39
40
41
...
»

Содержание RMO60TD



















































Отзывы:

Нет отзывов

Похожие инструкции для RMO60TD

Бренд: AR Страницы: 20

Бренд: 4iiii Страницы: 3

Бренд: FARMSCAN Страницы: 28

Бренд: Keithley Страницы: 138

Бренд: Unico Страницы: 96

Бренд: Tire-Safeguard Страницы: 6

Бренд: Omega Страницы: 20

Бренд: pts Diagnostics Страницы: 2

LeakTracker OIL-GLO ULTRA

Бренд: Spectroline Страницы: 12

350 Maritime V2

Бренд: TESTO Страницы: 106

Бренд: Hanna Instruments Страницы: 28

Бренд: UEi Страницы: 16

Бренд: Fluke Страницы: 5

Бренд: PCE Health and Fitness Страницы: 4

FI-500 FiberInspector Micro

Бренд: Fluke Страницы: 2

Бренд: R&S Страницы: 100

Fuel Metering Valves eXVG

Бренд: Hamilton Sundstrand Company Страницы: 36

Бренд: LaserLiner Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды