manualshive.com logo in svg

Duplo DBM-100, Инструкция по эксплуатации

Поделиться
Скачать
Duplo DBM-100 Скачать руководство пользователя страница 51

49

7. INSERTING PAPER MANUALLY

Check that the paper size, binding
method (saddle-stapling and center-
folding, center-folding only, side-
stapling, and corner-stapling), staple
p o s i t i o n ,   p r e s s   r o l l e r   c l e a r a n c e
adjustment, and paper guide roller unit
position adjustment settings have been
set.

•

Refer to “4. Binding”.

1

Switch to the manual mode using the
automatic/manual key.

•

When set to the automatic mode, press the key for

more than one second to set the manual mode. The

manual mode lamp will light up.

•

When the key is pressed for less than one second in

the manual mode, conveyance turns ON or OFF.

•

To return to the automatic mode, press the key until

the buzzer stops (for about 2 seconds).

2

Press the automatic/manual key for less
t h a n   o n e   s e c o n d   t o   t u r n   o n   t h e
conveyance.
Arrange the paper gently with your hand
one set at a time, then feed it into the
manual feed slot.

•

If no paper is inserted for several seconds, the

stacker belt will rotate and the binding set will be

conveyed to the paper receiving tray. If no paper is

inserted for several seconds after this, conveyance

will stop automatically.

To restart manual binding, press the automatic/

manual key for less than one second to turn on

conveyance.

3

Содержание DBM-100

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды