manualshive.com logo in svg

Duplo DBM-100, Инструкция по эксплуатации

Поделиться
Скачать
Duplo DBM-100 Скачать руководство пользователя страница 45

43

5. SETTING NON-STANDARD PAPER

shift

+

After adjusting the side jogger, be sure
to move this unit and adjust the collator's
paper line to the side jogger paper width
mark by pressing the shift key and side
jogger position key simultaneously.

When calling the memorized size again,
if the paper line and paper width mark do
not correspond, it means that the
positions of the collator and this unit are
wrong.
Move the unit and correct their positions.

While referring to “4-8. Raising Binding
Accuracy”, perform jogging to move the
side jogger inside, and at this position,
press the side jogger position key until
the inner line of the side jogger reaches
the paper size of the test set.

Remark

: For side-stapling and corner-stapling, the

paper size and side jogger scale sizes will

differ. Refer to the following.

Adjust the side jogger to the side jogger

scale as follows for the following paper

sizes.

For A5 paper : A4

For A4 paper : A3

8

Содержание DBM-100

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды