manualshive.com logo in svg

Duplo DBM-100, Инструкция по эксплуатации

Поделиться
Скачать
Duplo DBM-100 Скачать руководство пользователя страница 37

35

4. BINDING

4-10. Staple Detection Sensor

• Connect the lead wire (connector) projecting

from the stapler head to the connector on
the face of the counter attached of the main
unit.

• When the stapler head has been removed,

be sure to connect the connector unit
provided into an empty connector.

NOTE

: Be sure to turn off the power when connecting

and disconnecting the connector.

 Connection between staple detection sensor and main unit

Connector unit

Lead wire of staple detection sensors

Stapler heads

• When the staples reach the specified

r e m a i n i n g   a m o u n t   w h e n   t h e   “ s t a p l e
detection lamp” is lit, the “staple remaining
amount lamp” lights up and the unit
automatically stops.

 Staple detection sensor

This unit is mounted with the staple detection sensors. The unit automatically stops when the
staples reach the specified remaining amount.

• In the above case, there will be about 70

staples remaining. To be able to use up all of
these staples, press the “staple detection
ON/OFF key” and turn off the “staple
detection lamp”.

NOTE

: The unit will not stop even when it runs out of

staples.

• The “staple remaining amount lamp”

remains lit until the staple cartridge is
replaced with a new one.

Содержание DBM-100

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды