manualshive.com logo in svg

Duplo DBM-100, Инструкция по эксплуатации

Поделиться
Скачать
Duplo DBM-100 Скачать руководство пользователя страница 16

14

4. BINDING

<Setting Corner-Stapling>
• Staples the right or left corner of the paper

within 6 mm from the top of the paper.

• Letter size paper can be corner-stapling only

if fed in wide edge leading.

• Change the jogger of stapling side to the

jogger exclusive for corner-stapling.
As shown in the figure, the side joggers for
saddle-stapling folding, center-folding, and
side-stapling can be removed. The corner-
stapling side jogger (left or right) is to be
attached instead (either side according to
the side of the paper to be stapled).

• Remove the stapler head which is not used

for corner-stapling, and attach the connector
unit (accessories). Secure the clincher 80
mm from the center of the unit.
A n d   s e t   t h e   c o r n e r - s t a p l i n g   g u i d e
(accessories) at the same position.

NOTE :

Should not use stapler head without the

staple cartridge instead of the corner-

stapling guide.

Stapling with the staple cartridge removed

will cause the stapler head to damage.

Connector unit (accessories)

Corner-stapling guide (accessories)

Содержание DBM-100

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды