Ducati MULTISTRADA 1200S Скачать руководство пользователя

Страница: 17 / 311

Riding gear

Riding gear is very important for safety. Unlike cars,

a motorcycle offers no impact protection in an

accident.
Proper riding gear includes helmet, eye protection,

gloves, boots, long sleeve jacket and long pants.
-

The helmet must meet the requirements listed

at page 14; if your helmet does not have a visor,

use suitable eye wear;

Use five-finger gloves made from leather or

abrasion-resistant material;

Riding boots or shoes must have non-slip soles

and offer ankle protection;

Jacket, trousers or riding suit must be made from

leather or abrasion-resistant material and have

high-visibility colours and inserts.

Important

Never wear loose clothing, items or accessories

that may become tangled in motorcycle parts.

Important

For your safety, always wear suitable protective

gear, regardless of season and weather.

Important

Have your passenger wear proper protective

clothing.

D-Air

intended use

Warning

The D-Air

protection system was developed by

DAINESE and tested by TÜV to be used on asphalt

only. Therefore, in order to avoid any undesired

activation of the Jacket and/or Waistcoat, the relevant

electronic device must be disabled when riding off-

road - by "off-road" we mean the track use as well.

Warning: with Jacket/Waistcoat electronic device off,

the rider and passenger protection is disabled.

D-Air

is an innovative system designed for riders'

safety on the road. It has not been conceived for use

on uneven roads or off-road. The Jacket/Waistcoat
provided with the D-Air

Device can be worn by the

motorcycle rider and passenger.

Warning

Do not use D-Air

for purposes other than those

it has been designed for.

Содержание MULTISTRADA 1200S
























































































































































































































































































































Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы:

Похожие инструкции для MULTISTRADA 1200S

Бренды по названию

Популярные бренды

Ducati MULTISTRADA 1200S, Руководство пользователя

Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы:

Похожие инструкции для MULTISTRADA 1200S

Бренды по названию

Популярные бренды