Ducati MULTISTRADA 1200S Скачать руководство пользователя страница 134

Страница: 134 / 311

Instrument panel backlighting setting

function

This function adjusts the instrument panel

backlighting intensity.

To display the function, enter the “setting” menu

page 101 and access the “B. LIGHT” page.

The information will be displayed as follows:
-

the arrows indicate the setting currently in use;

use buttons (1) and (2) to select the new setting;

to store the new setting press the reset button

(4); the arrows will move on to the stored setting.

To exit, select “EXIT” and press the reset button (4).
"MAX" setting: storing this condition, the backlighting

is at maximum brightness.

"MID" setting: storing this condition, the backlighting

is reduced approximately 30% relative to maximum

brightness.

"MIN" setting: storing this condition, the backlighting

is reduced approximately 70% relative to maximum

brightness.

Note

In the event of an interruption of the power

supply from the battery, when power is restored at

the next Key-On, the backlighting will always be set

by default to maximum brightness.

133

Содержание MULTISTRADA 1200S
























































































































































































































































































































Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы:

Ducati MULTISTRADA 1200S, Руководство пользователя, Страница: 134 / 311

Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы: