Ducati MULTISTRADA 1200S Скачать руководство пользователя страница 35

Страница: 35 / 311

OPERATION STATUS

WARNING LIGHTS

AIRBAG – OK

JACKETS - CONNECTED and OK
Under standard operating conditions and with jack-

et (jackets) connected, the system will inform the

user about which jacket is connected to the system

and if its operation is OK. This condition will be sig-

nalled through the relevant warning light steady on.

if the RIDER jack-

et is connected

and is OK

OFF

if the PASSEN-

GER jacket is con-

nected

AIRBAG – OK

JACKETS - CONNECTED and IN ERROR
Under standard operating conditions and with jack-

et (jackets) connected, the system will inform the

user if and which jacket is in error. This condition

will be signalled through the relevant warning light

slow blinking.

SLOW BLINK

if the RIDER jack-

et is connected

and in error

SLOW BLINK

if the PASSEN-

GER jacket is con-

nected and in er-

ror

Содержание MULTISTRADA 1200S
























































































































































































































































































































Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы:

Ducati MULTISTRADA 1200S, Руководство пользователя, Страница: 35 / 311

Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы: