Ducati MULTISTRADA 1200S Скачать руководство пользователя страница 24

Страница: 24 / 311

Carrying the maximum load allowed

Your motorcycle is designed for long-distance riding,

carrying the maximum load allowed in full safety.

Even weight distribution is critical to preserving these

safety features and avoiding trouble when

performing sudden manoeuvres or riding on bumpy

roads.

Warning

Maximum speed allowed with side panniers

and top case installed is 180 km/h and must in any

case comply with statutory provisions.

Warning

Do not exceed the total permitted weight for the

motorcycle and pay attention to information provided

below regarding load capacity.

Information about carrying capacity

Important

Arrange your luggage or heavy accessories in

the lowest possible position and close to motorcycle

centre.

Important

Never fix bulky or heavy objects to the

handlebar or to the front mudguard as this would

affect stability and cause danger.

Important

Be sure to secure the luggage to the supports

provided on the motorcycle as firmly as possible.

Improperly secured luggage may affect stability.

Important

Do not insert any objects you may need to carry

into the gaps of the frame as these may foul moving

parts.

Warning

Make sure the tyres are inflated to the proper

pressure and that they are in good condition.

Please, refer to paragraph "Tyres" in page 278.

Содержание MULTISTRADA 1200S
























































































































































































































































































































Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы:

Ducati MULTISTRADA 1200S, Руководство пользователя, Страница: 24 / 311

Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы: